Updated: 2012-10-31 21:13:53
Hi there,
I am fabricating an automatic door opening design. It is basically a box with a 'wedged' cover that vertically lifts up and slides out...
Updated: 2012-10-31 21:04:25
Check it out, this mutation is known as a split. As I've posted before the most common mutations are Blue being 1 out of 2 million, Callico 1 out of...
Updated: 2012-10-31 20:29:04
Hi,
I want to create a home-made power supply for a Raspberry pi + USB hub, I am looking for something along the lines of a 1.5-2A 5V regulated...
Updated: 2012-10-31 20:23:42
Can someone please suggest an accelerometer to be used with a Campbell Scientific CR3000 Data Acquisition system. It will be used to measure vehicle...
Updated: 2012-10-31 20:23:02
Hi everyone.
Im studying mechatronics, and have a habit that every semester needs to have a electronics project, and my current project has blown...
Updated: 2012-10-31 20:21:08
(Sorry if this gets posted more than once, I get a server error when I hit the submit button)
Hi,
I recently built a circuit to monitor a...
Updated: 2012-10-31 18:04:21
I want to build a closed loop control system that require ADC for six (6) LDRs and six (6) PWM output to control six DC lamps. To program it, I plan...
Updated: 2012-10-31 17:24:36
Hi, I am doing a project in which I am sending signals from an Arduino to an array of speakers and need a component which could act as a voltage...
Updated: 2012-10-31 16:48:55
i found a simple schem of Line follower mobot using transistors.. the motors spin in the same direction(clockwise) when i build in Simulation..
...
Updated: 2012-10-31 16:15:46
This is a nice clamp on digital meter which reads DC and AC amps, temp, capacitance, volts, diode, etc... from Amazon was cheap.
If you find the K...
Updated: 2012-10-31 15:22:17
I'm ready to abandon my cable provider and install a TV antenna in hopes of getting free (almost) HD reception. I live on the sixth floor of a high...
Updated: 2012-10-31 15:06:59
Hello everyone,
What should I do to determine the input impedence of an opamp? I want to find the input impedence of a noninverting amplifier and...